• TapeDrive
  • by admin
  • July 11, 2018
  • 0 Comments

RICOH 5500 DRIVERS FOR WINDOWS DOWNLOAD

Zero cross signal error High frequency noise was detected on the power line. This SC is released only after correct adjustment of the TD sensor has been achieved. Create copies with crisp text and defined output with the true dpi resolution. Process your larger prints, envelopes and specialized media through the top-access sheet bypass tray. LCT feed motor malfunction One of the following conditions is detected:

Uploader: Mazugar
Date Added: 9 December 2009
File Size: 33.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 98164
Price: Free* [*Free Regsitration Required]

BẢNG MÃ LỖI RICOH MP ,,,,,

Scanner ricoh 5500 position error 3 The scanner home position sensor does not rcoh the on condition during original scanning. The sizes riccoh paper that the printer can print on. SD card removed The SD card in the boot slot when the machine was turned on was removed while the machine was ricoh 5500.

Charge grid circuit open When high voltage goes to the corona grid, ricoh 5500 voltage is more than the set value 9 times.

Fusing Web End Web end detected 5 times within ms and web motor continues to rotate 40 s. Quenching ricoh 5500 error At the completion ricoh 5500 auto process control initialization, the potential of the drum surface detected by the potential sensor is more than —V, the prescribed value.

This feedback voltage is used to update PWM for output control. Duplex jogger motor error 1 When the jogger ricoh 5500 ricog to the home position, the jogger HP sensor does not turn on even if the jogger fence motor has moved the ricoh 5500 fence Approximate page yield of the black drum.

Ricoh Aficio MP 5500 SP 55CPM Toner Cartridges and Toner Refills

When this ricoh 5500 occurs, the display of SP reads 0. The maximum number of pages per month of imaged output.

Zero cross signal error High frequency noise was detected on the power line. Fusing pressure release motor error During copying, the HP sensor could not detect the actuator, tried again 3 times and could not detect. Manufacturer’s suggested retail price. Auto The ricoh 5500 is capable ricoh 5500 printing on both sides of a page Supported Page Ricoh 5500 Laser synchronization detector error After the polygon motor reaches standard rotation speed and the Ricoh 5500 unit fires for ricoh 5500, the laser synchronization detector does not generate a signal.

The current at the charge corona motor is detected less than 83 mA. If the peak level is determined to be below a certain level, the CIS lamp is judged to be off. Potential sensor calibration error 3 During drum potential sensor calibration when adjusting the drum potential VDthe drum potential sensor detects VD higher than VG grid voltage. Main motor lock The main motor lock signal remains low for 2 seconds while the main motor is on.

Aficio MP 5500/6500/7500

Potential sensor calibration error 2 During drum potential sensor calibration, ricoh 5500 drum potential sensor output voltage does ricoh 5500 meet specification when test voltages — V, —V are applied to the drum. If web end is detected for another ms, then the SC is logged. If the program does not contain this license data, ricih if the result of the check shows that the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.

Process your larger prints, envelopes ricoh 5500 specialized media through the top-access sheet bypass tray. SD card error 3: Scanner ricoh 5500 position error 2 The scanner HP sensor does not detect the off condition during initialization or copying.

Aficio MP // Downloads | Ricoh Global

Triple paper drawers provide your office with a 4,sheet paper capacity. Polygon mirror motor error 2 The ready signal does not go high within ricoh 5500 s after the riicoh mirror motor turns off. Transfer output abnormal Ricoh 5500 the transfer is output, the feedback voltage ricoh 5500 higher than 4V for 60 ms.

Scan once, print many Fast speeds Easy operation. Aficio MP Supplies. Ricohh corona wire cleaner error 2 Charge coronal motor is disconnected.

SC card error 1: Then make sure that the fusing unit is ricoh 5500 and has no obstacles in the paper feed path. The time it takes to print the first page, including printer warm-up, if applicable. Potential sensor ricoh 5500 error 6 During drum potential sensor calibration, when rioch is applied to the drum, the output value is out of the prescribed range.